How RVCR works?


Dynamic reorienting of a twin Rotors acting as a Joint rotor system, where-

one rotor decouples from joint rotor system to be a stator temporarily, while the other acts as rotor.

Purport

The rotating piston-vanes inside the toroidal casing is is not allowed to collide with the stationary piston-vanes. As the rotating piston approaches a set distance (angle) from the stationary one, the latter one is released and allowed to rotate along with rotating piston synchronously and subsequently the approaching piston is stopped and held stationary It works in the same fashion as the shuttle valve used in the invention of steam engine by James watt. The moving piston triggers an action ahead of it before reaching its end point in travel.

Rotor sequence control

A free to rotate central shaft with flexibility to be coupled of decoupled with sleeves fitted with piston-vanes.

RVCR component sequence begins with twisting of the sleeve mounted which leads to the rotation of the piston inside the torous. At this point the second ‘piston-vane and sleeve’ assembly is held stationary. While rotating the sleeve is engaged with the central shaft. The rotating piston vane (within the toroid) would ultimately collide with the stationary Piston vane. The RVCR technique is to avoid the collision by ensuring the stationary piston-vane starts to rotate syncronously with the rotating piston. This hapens when the rotating pistion vane reaches a predetermined position at the proximity of the stationary one.


The position of the rotating piston-vane within the toroid, is determined externally. This is done by referencing a point on the sleeve on which the piston-vane is rigidly fitted to. This is done by a cam filled on the sleeve.

As the rotating piston-vane reaches the proximity of stationary 'piston-vane, at a certain predetermined point, the profile of the cam on the sleeve actuates a follower.
This actuation is then used to release the stationary 'VS' (from being rigidly held to ground) and couples it with the central shaft. As it Couples with central shaft, both 'VS' synchronously rotate.

Subsequently when the previously rotating piston-vane reaches the point where its counterpart was held stationary. Now this position is referenced by cam and follower of its counterpart, which decouples it from shaft (and makes it stationary by holding it to ground). The pattern is repeated wherein each ‘VS’ rotates alternately with its counterpart being stationery and role reversal happens after a short period of both VS rotating synchronously.

Handling fluids

The space within the hollow toroid -parted and trapped between piston vanes varies as the piston-vanes rotate.

The RVCR is about the volume inside a toroidal casing which is parted by the Piston Vanes. The volume trapped between the piston vanes is the fluid area. As the piston-vane rotates inside the toroidal chamber the volume between the Piston-Vanes changes. The volume ahead of the piston-vane reduces and behind it increases.

The rotating piston-vane compresses air ahead of it, against the stationary Piston-vane. The increasing volume behind it rarifies the air. The fluids spaces communicate with the outside air through conventional valves and ports. Valves are operated in relation to piston-vane position by cams mounted on sleeves and its associated drive chain. The choice of ports and valve are made to suit the application.

This sequential gas volume change across the rotating piston-vane during operation is used for the various thermodynamic processes. Insert cut section animation.

Variable compression

The space within the hollow toroid -parted and trapped between piston vanes varies as the piston-vanes rotate.

During operation (RVCR sequence control), the position of rotating piston-vane within the toroid determines the action of its paring piston-vane. The positional point where the rotating piston-vane actuates the stationary one, can be varied. The closer the Point gets to the stationary piston-vane the lesser the volume ahead of it.

In thermodynamics this lowering of volume converts to higher pressure. The varying of the point of actuation varies the volume reduction ahead of piston-Vane. This translates to varying of compression ratio and hence the pressure ratios.

RVCR allows real-time varying of the said point of actuation of synchronous rotation of piston-vane with ease. This is done by manipulating follower position along varying cam dwell angle.

The volume sandwiched between the two piston vanes remains constant during synchronous rotation. In thermodynamic terms this translates to ‘Constant Volume Process’. Insert now ppts slide on VCR

RVCR workings

The space within the hollow toroid -parted and trapped between piston vanes varies as the piston-vanes rotate.


The animation shows laymens depiction of one Vane rotation and the compression and expansion within transparent chamber.


The animation depicts cut section through the transverse plane and the one of the various possible air through put.


The animation depicts animation of exhaust valve, cam and drive train for exhausting gases after expansion of gases.

Summary

RVCR is about sequential motion of alternately rotating piston-vanes with a period of both rotating synchronously before role reversal

This is attained by referencing the position of piston-vanes externally.

The point of initiation and end of said synchronous rotation defines the compression ratio.